Agent Upstart

Cool things people are building with agents — and practical help getting the most out of them.

Playbooks · Coding tasks

Claude designs three electronic prototypes

Written November 10, 2026

Claude Fable 5.2 designed a speakerphone, a voice-assistant hub, and a handheld virtual pet. Diode Computers built all three from Claude's files, and the circuits worked without fixes. They are prototypes, not products.

What Claude built

Anthropic's research post, published November 9, describes a second collaboration with Diode Computers, a company that designs and manufactures circuit boards. The first round, a little over a year ago, tested earlier Claude models on basic circuit tasks; they could not reliably lay out a board. This time Claude Fable 5.2 was asked to design three devices from short prompts: a speakerphone, a voice-assistant hub, and a handheld virtual pet.

For each device, Claude wrote the specifications, drew schematics, placed components on the printed circuit board, routed the copper connections, designed a 3D-printable enclosure, wrote the firmware, and prepared a parts list. The speakerphone prompt asked for "a puck that plugs into a computer over USB-C and includes microphones and a speaker, supporting Bluetooth with a PCB antenna." Diode assembled the boards and ran the firmware under Claude's direction. The speakerphone still works after weeks of use, and the other two are also in good working order. The prototypes worked without any fixes to their circuitry.

How it improved on earlier models

The step forward is in geometric reasoning — where to put parts on a board and how to route the connections between them. Earlier models placed supporting parts too far from the chips they served, or oriented connectors wrongly, and left many boards 95% complete but unusable. Fable 5.2 routed the most important connections first: high-speed signals, high currents, and noise-sensitive tracks. It also revised its own work without being prompted, reassigning signals to different pins so the tracks under the touch controls on the speakerphone could stay on one layer. On the voice-assistant hub it deleted and rerouted copper connections dozens of times until the layout worked.

Two benchmark numbers come with the post. On PCB Gym, Diode's internal benchmark that scores models on placing components and rerouting connections on boards with their layouts removed, Fable 5.2 scored 69%, against 25% for Fable 5. On BenchCAD 2.1, a public benchmark that tests rebuilding 3D parts, assemblies, and circuit boards from engineering drawings and images, Fable 5.2 scored 83.5%, nearly double the score of Fable 5.1.

Claude also did work that is easy to miss in the headline. It read chip datasheets when a decision depended on a part's details. It wrote its own router in about half an hour: an algorithm that divides the board into a grid and searches for a clear path for each track. It did that after judging that KiCad's built-in router would take too much step-by-step guidance for the hub's long tracks. It ran design-for-manufacturing and sourcing checks itself, fixed six solder-mask slivers that were too thin to manufacture, and correctly ignored a flag that called a deliberate connection between two grounds an error. Diode manufactured all three boards directly from Claude's design files, without any back-and-forth over adjustments.

Limits

Related playbooks

Sources

Back to: Coding playbooks hub · Also: Simon Willison's mystery beep, triangulated